 |
To reinforce a door against kick-in attack
|
Fitting a mortice deadlock, or sashlock, involves removing wood from the door This leaves a very weakened area around the mortice lock The Kickstop Door Reinforcer will help remedy this problem
The Kickstop Lockguards The DeadlockGuard is for use with a mortice deadlock The SashlockGuard is for use with a mortice sashlock |
A Kickstop Door Reinforcer is used to reinforce and strengthen a wooden door around a traditional UK lever, euro profile or oval profile cylinder mortice lock.
Fitting a mortice deadlock, or sashlock involves removing wood and this leaves a very weakened area around the mortice lock. The LockGuard plates are bolted together through the door - to resist a 'kick-in' attack and so help avoid a burglary.
The 2001 HingeGuard product has no keyway and is designed to strengthen the door adjacent to the hinges, any other weakened part of the door or as a bolted through 'blanking off' plate.
Kickstop has Door Reinforcers in many colours and finishes for UK, Euro Profile and Oval Profile cylinder mortice deadlocks and sashlocks.
The illustration is of a traditional door fitted with a standard UK mortice sashlock.
The Kickstop 9619 SashlockGuard (illustrated) will reinforce the door around the lock.
The Kickstop 9602 FrameGuard (illustrated) will reinforce the frame adjacent to the lock.
The Kickstop 9618 HingeGuards (illustrated) will reinforce the frame adjacent to the hinges.
Mortice sashlock shown - for illustration purposes only
Before ordering
*Very carefully check the type of keyway you require
Traditional UK (UK) - Euro profile cylinder (EU) - Oval cylinder (OV)
|
|
|
|
|
UK (for traditional lever/detainer mortice deadlock)
|
EU (for Euro Profile cylinder mortice deadlock)
|
OV (for Oval Profile cylinder mortice deadlock)
|
Mortice deadlocks, Euro and Oval cylinders shown - for illustration purposes only
|
Euro Profile Cylinder |
Oval Profile Cylinder |
|
|
|
|
|
|
|
|
9600UK Deadlockguard for Mortice Deadlock 188 x 35 x 7mm |
9600EU Deadlockguard for Mortice Deadlock 188 x 35 x 7mm |
9600OV Deadlockguard for Mortice Deadlock 188 x 35 x 7mm |
|
|
|
|
|
2000UK Deadlockguard for Mortice Deadlock 203 x 50 x 3mm |
2000EU Deadlockguard for Mortice Deadlock 203 x 50 x 3mm |
2000OV Deadlockguard for Mortice Deadlock 203 x 50 x 3mm |
|
|
|
|
|
9601UK Deadlockguard for Mortice Deadlock 300 x 35 x 7mm |
9601EU Deadlockguard for Mortice Deadlock 300 x 35 x 7mm |
9601OV Deadlockguard for Mortice Deadlock 300 x 29 x 7mm |
|
|
|
|
9619 Sashlockguard For Mortice Sashlock 240 x 75 x 3mm The top elongated hole is for the spindle The lower 'universal' hole is for the UK keyway, Euro cylinder or Oval cylinder. To be used with customers own lever lock furniture |
2001 Hingeguard For Hinge on Door 203 x 50 x 3mm For use where a much higher level of additional security is required |
Product code 9600: - 188 x 35 x 7mm - bevelled edge to resist side impact - all keyways.
Product code 2000: - 203 x 50 x 3mm - flat plates - all keyways.
Product code 2300: - 230 x 50 x 5mm - flat plates - for UK and Euro
Product code 9601: - 300 x 29 x 7mm - bevelled edge to resist side impact - all keyways.
Product code 9601: - 300 x 35 x 7mm - bevelled edge to resist side impact - all keyways.
Product code 9619: - 240 x 75 x 3mm - reversible flat offset plates - universal keyway - for UK, Euro or Oval
9619 Backset: 27mm Minimum - 47mm Maximum
9619 Centres: 30mm Minimum - 92mm Maximum.
Product code 2001: - 203 x 50 x 3mm - flat plates - no keyway.
Illustration showing how 9601 DeadlockGuard is fitted to door
Tel: 01536 790999 Fax: 01536 790710
Online B2B shop powered by Security Matters
